Stationery & Occasions

TABLE OF CONTENTS
Click a category below to jump to that section.

Moving Announcements

Memorial Cards 

Mitzvah Invitations

Sweet 16 Invitations

Quinceañera Invitations

Debutante Party Invitations

MOVING ANNOUNCEMENTS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission. Example featured is Desert Crayon Drawing by Cass Loh
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope. Example featured is Toile Home by Teju Reval

MEMORIAL CARDS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission. Example featured is Golden Botanical by Susan Zinader
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope.
	THANK YOU CARD (REQUIRED) Design the front of an A2 folding thank you card (the interior and back will be left blank). You may design either a portrait or landscape orientation card. Please ensure there is at least one customizable element in your design (i.e. name or initials). You are welcome to also include a photo in your Thank You Card design, but a photo is not required. Please do not include a year on your thank you card, as this is difficult to update if your design is in our assortment for multiple years. If the front of your design includes foil-pressed elements, please also include foil-pressed elements on your Thank You Card. Example featured is The Story Begins by Petra Kern

MITZVAH INVITATIONS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). Note! If your design includes a year on it, please make sure that it is next year (e.g. if it is currently 2025, use 2026). If your design is in our assortment for multiple years, this will avoid additional work by our team to update and re-launch. If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission. Example featured is Modern Classic by Morgan Kendall
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope.
	THANK YOU CARD (REQUIRED) Design the front of an A2 folding thank you card (the interior and back will be left blank). You may design either a portrait or landscape orientation card. Please ensure there is at least one customizable element in your design (i.e. name or initials). You are welcome to also include a photo in your Thank You Card design, but a photo is not required. Please do not include a year on your thank you card, as this is difficult to update if your design is in our assortment for multiple years. If the front of your design includes foil-pressed elements, please also include foil-pressed elements on your Thank You Card.
	FAVOR TAG (REQUIRED) Select one tag shape/size to create a customizable tag that coordinates with your winning design. Favor tags come in 3 different sizes: 3.5x2 (landscape or portrait) and 2.25x2.25 (square).  Favor tags are typically used by the hostess and placed on party favors. Include at least one customizable element on your tag (i.e. Thank You, name, Thanks for Celebrating, etc.). In addition to the front of the favor tag, please also design and submit a patterned backer. Solid backer options will already be available to customers. If you include a date, please do not include the year. If your winning design is foil-pressed, please do not include foil elements on this piece.
	STICKER (REQUIRED) Stickers are typically used by the host and placed on party favors. Please design for one sticker shape that will be offered with your design. See below for a detailed list of all sticker shapes. Include at least one customizable element on your sticker design (i.e. name, “Thanks for Celebrating”, etc.). If you include a date, please omit the year. If your winning design is foil-pressed, please do not include foil elements on this piece.
	RSVP CARD (REQUIRED) Some customers want to give guests the option to either send back their physical RSVP or to reply on their website. If you want to include a URL for online RSVPs, you’re welcome to do so. If your RSVP asks guests to write their initial beside their meal selection, please ensure there is adequate room for up to 2 guests’ initials next to each option - we recommend at least 1/2". Ensure the background is light enough in color for the recipient to write on. If your invitation is a dark color, consider using an inverted color scheme for the RSVP card. Include an RSVP date (date & month only, no year please!). This is usually 1-2 months before the mitzvah date. Include space for the guest(s) to write their names as well as attendance choices (i.e. “accepts” and “declines”).
	RECEPTION CARD (REQUIRED) This insert card is used to provide additional information about the reception. Here are some design ideas for you to consider: 1. Provide the address of the reception venue (if different from the ceremony location), or provide walking instructions to the reception location if within the same venue. 2. Describe the meal/activities (i.e. “small bites will be served” or “ join us for an evening of dinner & dancing!”) Do not include a year on this card. If you include a website link, make sure it is consistent with other website links across your suite.
	DIRECTIONS CARD (REQUIRED) This insert card can be used to communicate an array of information. Here are some options for you to consider: 1. Directions to the venue(s). Make sure the directions fit with the location listed on the invitation. 2. Information about hotel accommodations. Do not include a year on this card.

SWEET SIXTEEN INVITATIONS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). Note! If your design includes a year on it, please make sure that it is next year (e.g. if it is currently 2025, use 2026). If your design is in our assortment for multiple years, this will avoid additional work by our team to update and re-launch. If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission. Example featured is Checked by Jenna Holcomb
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope.
	THANK YOU CARD (REQUIRED) Design the front of an A2 folding thank you card (the interior and back will be left blank). You may design either a portrait or landscape orientation card. Please ensure there is at least one customizable element in your design (i.e. name or initials). You are welcome to also include a photo in your Thank You Card design, but a photo is not required. Please do not include a year on your thank you card, as this is difficult to update if your design is in our assortment for multiple years. If the front of your design includes foil-pressed elements, please also include foil-pressed elements on your Thank You Card.
	FAVOR TAG (REQUIRED) Select one tag shape/size to create a customizable tag that coordinates with your winning design. Favor tags come in 3 different sizes: 3.5x2 (landscape or portrait) and 2.25x2.25 (square).  Favor tags are typically used by the hostess and placed on party favors. Include at least one customizable element on your tag (i.e. Thank You, name of baby, Thanks for Celebrating, etc.). In addition to the front of the favor tag, please also design and submit a patterned backer. Solid backer options will already be available to customers. If you include a date, please do not include the year. If your winning design is foil-pressed, please do not include foil elements on this piece.
	STICKER (REQUIRED) Stickers are typically used by the host and placed on party favors. Please design for one sticker shape that will be offered with your design. See below for a detailed list of all sticker shapes. Include at least one customizable element on your sticker design (i.e. name, “Thanks for Celebrating”, etc.). If you include a date, please omit the year. If your winning design is foil-pressed, please do not include foil elements on this piece.

QUINCEAÑERA INVITATIONS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). Note! If your design includes a year on it, please make sure that it is next year (e.g. if it is currently 2025, use 2026). If your design is in our assortment for multiple years, this will avoid additional work by our team to update and re-launch. If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission. Example featured is Quinceañera Party Dress by Paper Sun Studio
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope.
	THANK YOU CARD (REQUIRED) Design the front of an A2 folding thank you card (the interior and back will be left blank). You may design either a portrait or landscape orientation card. Please ensure there is at least one customizable element in your design (i.e. name or initials). You are welcome to also include a photo in your Thank You Card design, but a photo is not required. Please do not include a year on your thank you card, as this is difficult to update if your design is in our assortment for multiple years. If the front of your design includes foil-pressed elements, please also include foil-pressed elements on your Thank You Card.
	FAVOR TAG (REQUIRED) Select one tag shape/size to create a customizable tag that coordinates with your winning design. Favor tags come in 3 different sizes: 3.5x2 (landscape or portrait) and 2.25x2.25 (square).  Favor tags are typically used by the hostess and placed on party favors. Include at least one customizable element on your tag (i.e. Thank You, name, Thanks for Celebrating, etc.). In addition to the front of the favor tag, please also design and submit a patterned backer. Solid backer options will already be available to customers. If you include a date, please do not include the year. If your winning design is foil-pressed, please do not include foil elements on this piece.
	STICKER (REQUIRED) Stickers are typically used by the host and placed on party favors. Please design for one sticker shape that will be offered with your design. See below for a detailed list of all sticker shapes. Include at least one customizable element on your sticker design (i.e. name, “Thanks for Celebrating”, etc.). If you include a date, please omit the year. If your winning design is foil-pressed, please do not include foil elements on this piece.

DEBUTANTE PARTY INVITATION CARDS

	FRONT (REQUIRED) Ensure the front of your design stays true to your winning submission (unless changes were requested by our Merchandising team, found in the ‘Requests’ section of your File Request). Note! If your design includes a year on it, please make sure that it is next year (e.g. if it is currently 2025, use 2026). If your design is in our assortment for multiple years, this will avoid additional work by our team to update and re-launch. If your design is foil, your colorways should be differentiated by something other than foil color. Customers can pick any foil color they want for each colorway. Die-cut shapes are placed in the “background” layer within your templates. If your design uses a die-cut shape, you can turn shapes on & off here to preview your design. Our team will automatically launch your design with the die-cut shape matching your winning submission.
	BACKER (REQUIRED) A solid color backer will automatically be offered with your design, so please create a patterned backer that coordinates with the front of your design. Make sure you bleed the pattern design to the edge of the artboard (the color behind the logo will be applied by our team before launch). Do not include any customizable elements on your pattern backer, as our customizer cannot accommodate this. Please also avoid using text on your backer in general, as this causes confusion among customers. We cannot accommodate foil elements on the backer.
	ENVELOPE LINER Please create a patterned liner that coordinates with the rest of your design. Silver, Gold, and Rose Gold liners will also be available to customers as an option. Do not include any text or customizable elements on your liner, as our customizer cannot accommodate this. If you’d like to use the same single pattern for the liner that you submit for the backers, leave this artboard blank in the templates.
	MATCHING ENVELOPE Please include coordinating designs for both recipient address (front of envelope) and return address (back flap). All fonts used for addresses must be at least 2 points above the minimum font size. Names may be in script fonts, but due to postal regulations, script fonts may not be used for sender or recipient addresses. Please also ensure that the names are on one line only. Avoid using large blocks of color in your design or light pastel colors, as these do not render well when printed. Please also avoid using large areas of texture, as these have the potential to come across as a printing error. Do not slant or rotate any name/address text on your envelope.
	ENCLOSURE CARD (REQUIRED) Design the front of an A2 folding thank you card (the interior and back will be left blank). You may design either a portrait or landscape orientation card. Please ensure there is at least one customizable element in your design (i.e. name or initials). You are welcome to also include a photo in your Thank You Card design, but a photo is not required. Please do not include a year on your thank you card, as this is difficult to update if your design is in our assortment for multiple years. If the front of your design includes foil-pressed elements, please also include foil-pressed elements on your Thank You Card.
	FAVOR TAG (REQUIRED) Select one tag shape/size to create a customizable tag that coordinates with your winning design. Favor tags come in 3 different sizes: 3.5x2 (landscape or portrait) and 2.25x2.25 (square).  Favor tags are typically used by the hostess and placed on party favors. Include at least one customizable element on your tag (i.e. Thank You, name of baby, Thanks for Celebrating, etc.). In addition to the front of the favor tag, please also design and submit a patterned backer. Solid backer options will already be available to customers. If you include a date, please do not include the year. If your winning design is foil-pressed, please do not include foil elements on this piece.
	STICKER (REQUIRED) Stickers are typically used by the host and placed on party favors. Please design for one sticker shape that will be offered with your design. See below for a detailed list of all sticker shapes. Include at least one customizable element on your sticker design (i.e. name, “Thanks for Celebrating”, etc.). If you include a date, please omit the year. If your winning design is foil-pressed, please do not include foil elements on this piece.